BREMBO RADIAL BRAKE MASTER CYLINDER 15RCS SHORT STROKE HUSQVARNA 401 VITPILEN 18-19

BREMBO RADIAL BRAKE PUMP 15RCS CORSACORTA HUSQVARNA 401 VITPILEN 18-19. Allows you to map the first part of the lever travel by adjusting the idle stroke. The RCS Corsa Corta allows you to calibrate this parameter on three positions (RSN), to obtain the maximum feeling of the braking attack. In the R "Race" position the idle stroke is minimized, the lever will be more reactive, in the S "Sport" position the idle stroke is in an intermediate position, as is the feeling at the lever, in the N position" Normal" the idle stroke is greater, therefore there will be a wider modulation and a sweeter braking attack. It allows you to change the wheelbase in two positions: 18 mm, for maximum modulation and 20 mm, for maximum braking promptness. Technical characteristics: the pump body is forged and CNC machined, hard oxidized, the brake lever is jointed and there is a stop light switch. The standard mechanical stop light switch on this master cylinder allows the correct operation of the stop light and therefore road use. It is possible to remove it. The switch works with the lever at rest in "normally open" conditions, pressing the lever closes the circuit. It cannot replace switches that work "normally closed", for example BMW, in these cases it is necessary to purchase an optional switch. It can be mounted on twin disc systems with floating type calipers (naked) or single disc system (motard). The hardware for the brake hose fittings is not present in the kit, it must be purchased separately if the original one is not compatible.